Shroud and Cable

Recommended
Security Products

Made in Australia.

Click link or picture
to visit Web Site.
Open in new window.

Stop thieves stealing your towable Vehicle.

Designed to fit all diameter and width wheels from a Wheel on a Jet Ski Trailer up to a Wheel on a 4WD Camper Trailer. How innovative is that...

Other
Wheel Clamp
Web Sites

	Trailer Wheel Clamp
	Caravan Wheel Clamp
	Trailer Security
	Wheel Lock

Padlock Protection

Unique Impenetrable
Security System

Designed to replace
a Padlock and
Mild Steel Chain.

Don't wait until your possessions are stolen.

High Tensile Chain

10mm diameter
High Tensile Chain Quotation / Enquiry Form

Cannot be cut with a:
	Standard Bolt Cutter
	Hack Saw
	or any other non powered hand-held metal cutting tool.

Padlock Guard

Unlock your Padlock leaving the Chain on the Shackle, then slide Padlock Guard between the Padlock Body and its Shackle. Then close the Padlock. When Padlock Guard is closed it STOPS a thief breaking it using either a Leverage, Hammer or Bolt Cutter Attack.

Other Protecting Padlock Sites
	Lock Cover
	Lock Guard
	Lock Protection
	Lock Protector
	Lock Security
	Padlock Cover

Padlock Protector

Patented
Steel Shroud

STOPS the three methods 99.9% of all thieves use to break a Padlock or Mild Steel Chain, they are:

	Leverage
	Hammer
	Bolt Cutter Attack

Shroud and Cable

The Shroud and Cable is an Australian manufactured product designed specifically for the temporary security of a Caravan Safe when an installed Docking Station or a Vehicle Fixing Kit is unavailable.

Shroud and Cable - Steel Shroud

The Shroud and Cable - Steel Shroud
is manufactured from 3mm thick steel
and powder coated black.

The Steel Shroud has four corner anchor points at the rear allowing the Steel Cable to be passed through to secure the Steel Shroud to a rigid item eg. a vehicle's boot hinge or the back of the front seat floor bracket. Both sides and the rear has numerous punched holes suitable for concealed fastening of the Steel Shroud to a flat surface if required.

The bottom of the Steel Shroud has high tensile m5x8mm clinch studs with shake proof washers and high tensile nuts to match the existing fastening holes of the Caravan Safe Docking Station, leaving additional holes for conventional fastening down of the Steel Shroud and Docking Station to a flat surface if required.

The clinch studs are attached to the bottom of the Steel Shroud by pressing them through the Steel under high pressure, making the bottom of the Steel Shroud smooth.

The advantage of this manufacturing technique is, having no nuts on the outside of the Steel Shroud ensures if a thief does break into a Vehicle with a Shroud and Cable there are no nuts they can undo to remove the Caravan Safe.

Shroud and Cable - Steel Cable

Supplied with the Steel Shroud is a 1.8 meter long spring coiled 10mm plastic coated 8mm oversized Steel Cable with an extra heavy duty four stage combination lock. The combination can be set by the purchaser.

NB: We supply 34% extra security by using 8mm oversized Steel Cable to secure the Caravan Safe / Steel Shroud compared to Handgun legislation in the ACT (Australian Capital Territory) that specify the use of a 6mm Steel Cable to secure a Handgun in a Vehicle.

Shroud and Cable - the ULTIMATE SOLUTION

for temporary security for a

Caravan Safe

in vehicles and other temporary locations such as

in a Residential Home, Loan Car or Motel Room.

Where Can A Shroud and Cable Be Used

Suggested places where a Shroud and Cable can be used to temporarily secure the Caravan Safe:

	Using a loaned or Company Vehicle.
	Unavoidably having to leave a Caravan Safe for short periods of time in a Vehicle when, for whatever reason, a Vehicle Fixing Kit cannot be installed in that Vehicle.
	Visiting a client at their office and having to leave your Caravan Safe unattended in their office.
	At your work place when you have to leave your Caravan Safe unattended.
	Staying away over night at a Motel / Hotel.
	Staying overnight at a friends house.
	Overnight in your Home when a Docking Station has not been installed there.
	If you are renting a House or Apartment and you cannot install a Docking Station there.
	In your Caravan or Motor Home.
	Or any temporary location where there is something solid that the Steel Cable can be wrapped round and locked.

How To Fit The Steel Cable To The Steel Shroud

Slide the Steel Cable through at least two of the four corner anchor points of the Steel Shroud.

Shroud and Cable with Docking Station bolted to it. Temporary security for one Caravan Safe.

Loop one end of the Steel Cable around something solid and push it into the other end of the four stage combination lock and turn the four dials to lock it.

NB: You can set your own combination on the four stage combination lock.

Slide the Passport Safe into the Docking Station and lock it with the supplied Abloy Classic or Abloy PROTEC Key. All contents in the Passport Safe are now secure.

Where To Secure The Shroud and Cable In A Vehicle

	Wrap one end of the Steel Cable around the back of the front seat floor bracket and push it into the other end of the four stage combination lock and turn the four dials to lock it.
	Wrap one end of the Steel Cable through the boot hinge and push it into the other end of the four stage combination lock and turn the four dials to lock it.

Where To Secure The Shroud and Cable In A Vehicle

	Wrap one end of the Steel Cable around the back of the front seat floor bracket and push it into the other end of the four stage combination lock and turn the four dials to lock it.
	Wrap one end of the Steel Cable through the boot hinge and push it into the other end of the four stage combination lock and turn the four dials to lock it.

The Steel Cable can also be used to facilitate additional security of a brief case, suit case, tool box, camera case while carried in a Vehicle, Caravan or Motor Home.

Please Note

The price for the Shroud and Cable DOES NOT INCLUDE a Docking Station. If you intend to install the Docking Station that is included with each Caravan Safe in your Caravan, Motor Home, Residential Home, Apartment, Office or Factory and you also purchase a Shroud and Cable you will need to purchase another Docking Station to be bolted to the Shroud and Cable.

If this is the case select the appropriate Docking Station from our Price List / Secure Order Form. For your convenience, we will bolt the Docking Station to the Shroud and Cable FREE OF CHARGE before it leaves our factory.

Security product web sites you may be interest in.

What To Do Next...

	Go to Price List / Secure Order Form for a complete price list of all our products and accessories and to place your order.
	OR - Do you require a quotation and / or information sent to you? Go to Enquiry / Quotation Form.
	OR - For further information about the Caravan Safe please contact us.
	OR - Keep reading through this Web Site to learn about the Caravan Safe and WHY YOU MUST, for your own protection, secure your valuables in your Caravan, Motor Home or Vehicle when they are left unattended. This can be achieved by purchasing the Relocatable, High Security, Light-Weight, Australian designed, manufactured, Caravan Safe.